Poly 600 | Poly 686 | Super Stain
High Performance
Concentrated PolymerPOLY 600 - Product Information
The Cadillac of Polymers, with an industry high of
55% solids. This is one of the best polymers available on the market. If you’re currently buying Super Crete Concrete Solutions, Super Stone or Elite Crete (all of these are great products)- you will love our Poly 600 Polymer! But we can only save you money if you call!POLY 600 is concentrated, thick, and high in solids. Other polymer products are normally sold in five gallon buckets by distributors with substantial mark ups. We offer Poly 600 by the Drum passing on huge savings to our valued customers.
Data on Poly 600 in a Sand/ Cement Mortar Mix
Addition rate: 11% solids on 100 cement
Flow (%)___________________116
Density (g/cm³)_______________2.17 Day Cure
Flexural Strength_____________898 psi
Compressive Strength________4100 psi
BUY DIRECT from the Manufacturer!
Poly 600 Tote Now Available!
1 Tote = 275 gallons = 5 drums
$4,500.00 - Free Shipping (Includes Canada and Mexico.)1 Drum ($949) = 11 5gallon buckets ($86.27/5gallon bucket)
Includes Free Shipping!
5 Gallon Bucket - $99.00
Plus Shipping - (Does Not Include Shipping to Canada & Mexico)
DOWNLOAD >>> Material Safety Data Sheets (MSDS)
USAGE: 
Bond Coat 2 Qt. per 50# Bag Stamp Mix
1 1/2 Qts. per 50# Bag Water Proofer 2 Qts. per 50# Bag Our High Performance Polymer Poly 600 is especially formulated for the concrete overlay industry, commonly used for:
- Stamp Overlays
- Spray Textures
- Waterproof Cement
WHY POLY 600?
We sell to Blenders, Manufacturers & Applicators all over the world!
This is the best polymer money can buy for wholesale price and comes concentrated.
Our product is 55% solids which is higher than most of our competitors and you’re not paying to ship water. Use our product and you will never buy any other high-priced polymer again. Our customers’ response has been overwhelming. They cannot believe how strong our product is and how much money they are saving- especially with the free shipping on 55 gallon drums or bigger.
< Back to Top
POLY 686 - Product Information
5 Gallon Bucket - $99.00
Plus Shipping - (Does Not Include Shipping to Canada & Mexico)
ABOUT POLY 686Description:
A redispersible, vinyl acetate-ethylene copolymer powderApplication:
- Suggested for use as a polymer modifier for hydraulic cement mixtures, in particular for:
- Self-leveling floor formulations
- Pre-packaged ceramic tile adhesives and grouts
- Pre-packaged mortar repair kits
Features:
In a proper mix design, the addition of Dry Poly 686 to hydraulic cement mixes provides the following advantages:
- Pre-mixing of polymer, cement and aggregates, only requiring the addition of water
at the job site- Increased adhesion to non plastic and non dusty surfaces
- Wet curing is not required
- Increased flexural strength
- Increased abrasion resistance
- Increased resistance to freezing and thawing
- Does not require addition of an antifoam
- Good long term shelf stability
- Reduced water/cement ratio
Properties:
- Appearance – White free flowing powder
- Volatile Content, maximum, %-2.0
- Ash Content, %-8.0 -12.0
- Residual Vinyl Acetate Content, % - <0.2
- Density, g/ml, minimum -0.340
U.S. lb/gal, minimum -2.8
Glass Transition Temperature, C +20Storage:
Store in a dry place where the temperature does not exceed 32 degrees Celsius (90 degrees Farenheit)
Ideal storage conditions are in a sealed water tight container at 22 degrees Celsius (72 degrees Farenheit) and are at a relative humidity of less than 50%. Do not store this material unused for more than six months, and do not store more than six bags high.
Great additive for concrete curbing.
Shipping form:
Available in bags, net weight 13.4-14.1 Kg (29.5-31.0 lbs)Typical Properties:
Flow from 2” W x 1” H cylinder 6 ¼”
Compressive Strength 24 hr 983 psi
7 days 2,350 psi
28 days 4,250 psi
SUPER STAIN- Product Information
Super Stain - 5 gallons- $139.00 or 1 gallon- $35.00 Another Performance Polymers Product Saving You Money
< Back to Top
HOME | PRODUCT INFORMATION | PHOTO GALLERY | CONTACT US | ORDER
© 2006 Performance Polymers, LLC. Designed by NIKIGRAPHICS
